Osvaldo Gallina
Argentina
Inicio | Foros | Avisos Clasificados | Regístrese | Contáctenos
 
 
 
     
  Estudiantes
Univesidades y Carreras
Contactos Estudiantes
Tu Consulta
Consultas Respondidas
Trabajos y Posters
Foros

 
El esmalte dental
* Trabajo enviado por Romina Figueroa, estudiante de 2° año de la Universidad "Gran Mariscal de Ayacucho", Venezuela, Facultad de Odontología.

El esmalte es el tejido más duro en el cuerpo y está compuesto, casi completamente (97 por ciento a través de peso) de sales minerales. Cubre que los coronal dividen del diente y lo protegen de las acciones abrasivas de masticación. Estructuralmente está compuesto de millones de varas de esmalte diminutas que se extienden del dentin _ esmalte unión a la superficie del diente. En la mayoría de las secciones las varas parecen ser ligeramente ondulado. En la sección del occlusal de la corona, sin embargo, ellos pueden ser sumamente enroscados. Ellos son aproximadamente 4 micras en diámetro y, se estima, sus números van de un bajo de 5 millón a un alto de 12 millón por diente que depende del tipo y tamaño de la corona.

Líneas incrementales de Retzius
El esmalte es formado por ephitelial células termed ameloblast que desaparece después del tejido se completa. La formación empieza diariamente a los centros de crecimiento a lo largo de la unión del dentinoenamel y beneficios en cono sucesivo o incremental formó capas a lo que se volverá la superficie de la corona del diente. El número de centros de crecimiento corresponde al número de cúspides en un diente particular. Se ponen conos incrementales de esmalte abajo uno sobre el otro hasta los alcances de esmalte la altura de la cúspide. Cuando eso ocurre, los márgenes de los conos de esmalte adyacentes normalmente unen para formar un techado proteccionista sólido para el diente.

Se llaman las demarcaciones entre las capas incrementales de esmalte las líneas incrementales de Retzius. Ellos pueden compararse a los anillos de crecimiento en un árbol y, como esos anillos, ellos reflejan variaciones en estructura que ocurre durante el crecimiento de esmalte. Por ejemplo, el esmalte de los dientes caduco desarrolla en parte antes y en parte después del nacimiento. El límite entre las dos porciones de esmalte en los dientes caduco es marcado por una línea incremental acentuada de Retzius llamada los neonatal linean o anillo del neonatal. otros factores constitucionales o medioambientales como destete, verano o invierno sazona o enfermedad severa que ocurre durante el tiempo de formación de esmalte = es grabada por la línea incremental de Retzius.
Se perfilan las líneas de desarrollo en el dentin grandemente. Las varas de esmalte están menos claras.
Faltas microscópicas o separaciones en el esmalte que se extiende hacia el centro de la superficie del diente y a veces alcanza el dentin. Ellos tienen un volumen orgánico alto y algunos científicos piensan que las bacterias caries-productores atacan los dientes a través de ellos así como a través de los hoyos más grandes y hendiduras. Amplificación aproximadamente x600. (Usó con permiso de Dickson, G., y otros. Fluorescencia de dientes: un medios de investigar su estructura. JADA 45: 661, el 1952 de diciembre)

Esmalte Lamellae
Se penetra esmalte a los puntos diferentes de tensión por laeflike delgado estructura los thet se extienden en momentos en el dentin. Ellos contienen material orgánico considerable y menos mineral que el esmalte adyacente. Hay tres tipos de lamellae. 1 aquéllos compusieron de segmentos de vara de esmalte calcificados malamente; 2 aquéllos que consisten en células degeneradas, y 3 aquéllos levantándose en hicieron erupción dientes donde los crujidos están llenos con materia orgánica.

Mechones de esmalte
Estas estructuras del ribbonlike estrechas se levantan a la unión del dentinoenamel y se extienden en el esmalte a sobre quinto a uno-tercero de su espesor. Ellos consisten en varas de esmalte de hypocalcified y como el lamellae ellos se extienden en la dirección del eje largo de la corona.

Conceptos de estructura de esmalte
Mucho tiene que ser aprendido todavía sobre la estructura exagerada de esmalte del diente. Antes de al advenimiento del microscopio del electrón, muchos investigadores subscribieron a la teoría que el esmalte está compuesto de un miríada de minuto, envainó, varas de esmalte segmentadas consolidadas juntos por una substancia del interprismatic. Algunos investigadores todavía son de esa opinión. Un número creciente de investigadores, sin embargo, después de estudiar el tejido bajo el microscopio del electrón, cuestione la existencia de vainas de la vara orgánicas y, por lo menos en esmalte humano, de una substancia del interprismatic separada.

Hoyos de esmalte y Hendiduras
Los márgenes periféricos de las tazas frecuentemente, no unen produciendo la formación de hoyos o hendiduras perfectamente en las ranuras de esmalte y fossae durante las fases finales de formación de esmalte. Los hoyos pueden ocurrir en la superficie del occlusal de los premolars y molares, también en las superficies bucales y linguales de los molares y en la superficie lingual de los incisivo superiores. Las hendiduras pueden ocurrir en las superficies del occlusal de los premolars y molares. Hoyos y hendiduras la oportunidad presente para el lodgment de ruinas de comida y bacterias y así promueve la ocurrencia de decaimiento.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Versión Inglés

Enamel is the hardest tissue in the body, being composed, almost entirely ( 97 percent by weight ) of mineral salts. It covers the coronal portion of the tooth and protect it from the abrasive actions of mastication. Structurally it is composed of millions of minute enamel rods which extend from the dentin _ enamel junction to the tooth surface. In most sections the rods appear to be slightly wavy. In the occlusal section of the crown, however, they may be extremely convoluted. They are about 4 microns in diameter and, it is estimated, their numbers range from a low of 5 million to a high of 12 million per tooth depending on the type and size of the crown.

Incremental lines of Retzius
Enamel is formed by ephitelial cells termed ameloblast which disappear after the tissue is completed. The formation begins at growth centers along the dentinoenamel junction and proceeds daily in successive or incremental cone shaped layers to what will become the surface of the tooth crown. The number of growth centers corresponds to the number of cusps on a particular tooth. Incremental cones of enamel are laid down one above the other until the enamel reaches the height of the cusp. When that occurs, the margins of the adjacent enamel cones normally unite to form a solid protective covering for the tooth.
The demarcations between the incremental layers of enamel are called incremental lines of Retzius. They may be compared to the growth rings in a tree and, like those rings, they reflect variations in structure that occur during the growth of enamel. For example, the enamel of the deciduous teeth develops partly before and partly after birth. The boundary between the two portions of enamel in the deciduous teeth is marked by an accentuated incremental line of Retzius called the neonatal line or neonatal ring. other constitutional or environmental factors such as weaning, summer or winter seasons or severe illness occurring during the time of enamel formation are recorded by the incremental line of Retzius.
The developmental lines in the dentin are sharply outlined. The enamel rods are less clear.
Microscopic faults or separations in the enamel which extend inward from the surface of the tooth, sometimes reaching the dentin. They have a high organic content and some scientists think caries-producing bacteria attack the teeth through them as well as through larger pits and fissures. Magnification approximately x600. ( Used with permission from Dickson, G., and others. Fluorescence of teeth: a means of investigating their structure. JADA 45: 661, December 1952 )

Enamel Lamellae
Enamel is penetrated at different points of tension by thin laeflike structures thet extend at times into the dentin. They contain considerable organic material and less mineral than the adjacent enamel. There are three types of lamellae. 1 Those composed of poorly calcified enamel rod segments; 2 those consisting of degenerated cells, and 3 those arising in erupted teeth where the cracks are filled with organic matter.

Enamel Tufts
These narrow ribbonlike structures arise at the dentinoenamel junction and extend into the enamel to about one-fifth to one-third of its thickness. They consist of hypocalcified enamel rods and like the lamellae they extend in the direction of the long axis of the crown.

Concepts of enamel structure
Much has yet to be learned about the ultra structure of tooth enamel. Prior to the advent of the electron microscope, many researchers subscribed to the theory that enamel is composed of a myriad of minute, sheathed, segmented enamel rods cemented together by an interprismatic substance. Some investigators are still of that opinion. A growing number of investigators, however, after studying the tissue under the electron microscope, question the existence of organic rod sheaths and, at least in human enamel, of a separate interprismatic substance.

Enamel Pits and Fissures
Frequently, during the final phases of enamel formation, the peripheral margins of the cups fail to unite perfectly resulting in the formation of pits or fissures in the enamel grooves and fossae. Pits may occur on the occlusal surface of the premolars and molars, also on the buccal and lingual surfaces of the molars and on the lingual surface of the upper incisors. Fissures may occur on the occlusal surfaces of the premolars and molars. Pits and fissures present opportunity for lodgment of food debris and bacteria and thus promote the occurrence of decay.


 
     
 

Google
 
 

Inicio
| Quienes SomosE-mail Gratis | ForosChat
Avisos Clasificados | Regístrese | Contáctenos | Publicite Aquí
webmaster@webodontologica.com © Copyright 2000 - Todos los derechos reservados
Sitio desarrollado por: